Troubles sometimes are caused by simple “faults” that you can easily correct without the help of a service
technician by first checking a few basic remedies.
Before you call or take your camcorder to an Authorized RCA Camcorder Servicenter, look below for the
type of trouble you are experiencing. Then perform the simple checks and adjustments listed for that trouble.
If service should be necessary, the warranty information lists what your warranty covers and explains how to
get service.
Trauble
:
Checks and Adjustments
No power l ON/POWER SAVE lever in POWER SAVE position. Place lever in ON
position.
l If using battery, it may need to be recharged.
l If using AC adapter/charger, make sure it is plugged into a working
outlet.
I
~~
~~~
~~~
~~~~--~~~~
~~~~~~~~~
~~
~~~~
-~-~-
~~~~~~~~~
~~~~~-
Won’t record or playback
/ l If using AC adapter/charger, make sure it is plugged into a working
~ outlet.
l If dew indicator (
4
) appears in the viewfinder, there is moisture in thecl
~ camcorder. Remove the cassette from the camcorder and let it dry
naturally.
Won’t playback
l There may be no cassette in the camcorder.
l
Try ejecting and reinserting the cassette.
,
l
The cassette tape may be broken, try another cassette.
~ l You may have reached the end of the cassette, try rewinding it.
l POWER switch must be in
PU
Y position.
Won’t record
l Safety tab has been closed. (See page 22.)
l POWER switch must be in CAM (camera) position.
~ l ON/POWER SAVE lever must be in ON position.
No picture in viewfinder
l Remove lens cap.
l ON/POWER SAVE lever must be in ON position when POWER switch is
in CAM (camera) position.
~-
~~
-~_~~~~~~~~~
4
.
_~~~~-
._.~.~
~~-
.~
~~
~~-.
-
Tape stops during rewind or i l Time counter memory may be on. Whenever an “M’ appears with the
fast forward time counter display, the camcorder will stop rewinding (or fast
~ forwarding) when counter reads “M
0:OO:OO”.
Press the REW or F.FWD
button again to continue rewinding or fast forwarding, or press
COUNTER MEM (memory) button to turn off memory stop feature.
Camcorder remains in “stop
l Press the PAUSE (II) (or PLAY) button to return to normal playback.
action” (play pause) mode ~
,
~~~
40
To Next Page
Loading...
Need help?
General
