RCA Professional series User Manual

40
Using the Tuner
• Press ENTER to confirm a character. If
no character is input, a space is input.
• The name is stored when ENTER is
pressed after choosing the fourth
character.
Notes:
• To erase a station name, simply repeat
steps 1-3 and input four spaces instead of
a name.
• Once you have named a station preset,
you can press
DISPLAY when listening to
a station to switch the display between
the name and the frequency.
Listening to Station Presets
You will need to have some presets stored to
do this.
1 Press TUNER (remote) or use the
MULTI JOG dial on the front panel
to select the tuner.
2 Press CLASS to select the class in
which the station is stored.
Press repeatedly to cycle through classes
A, B and C.
3 Press P–SET @/# (PRESET
TUNING
on the front panel) to
select the station preset you want.
Note:
If the receiver is left disconnected from the
AC power outlet for an extended period, the
station presets will be lost and will have to
be reprogrammed.
Naming Station Presets
For easier identification, you can name your
station presets.
1 Choose the station preset you
want to name.
See "Listening to Station Presets" (above)
for how to do this.
2 If you are using the remote control
press SET.
3 Press TUNER EDIT.
The display shows ST. NAME, then a
blinking cursor at the first character
position.
4 Input the name you want.
Names can be up to four characters long.
• Use the front panel MULTI JOG dial or
the remote control P–SET @/# buttons
to select characters.
31_5021.RCA.38.41 03.3.17, 8:25 PM40

RCA Professional series Specifications

General

Brand	RCA
Model	Professional series
Category	Receiver
Language	English