RCA RCRV06GR User Manual

13
English
“Repeat”
Multi-device commands (activities)
You can use the RCA Voice-Command Remote to manage your
entire home entertainment system with a single command. All
you need to do is a little homework before you train the remote, to
make sure you’ve got all the information you need beforehand.
The first step in using multi-device commands or activities is to
train your remote to turn on all your devices—an “all on” activity.
Since some devices take longer to turn on than others, timing
multi-device activities can be tricky. The “All On” activity makes
sure your devices are ready when you want to use them, making
all your other multi-device activities simpler and more reliable.
To train your remote to turn on all your devices:
1. Press the TRAIN button.
The RCA Voice Control Remote
responds: “Say a word.”
When the RCA Voice Control Remote
is ready to listen, the COMMAND light
illuminates.
2. Say: “Hello.”
The RCA Voice Control Remote asks
you to repeat the command.
4. Press the TV button.
The RCA Voice Control Remote
responds: “Button accepted. Push
another button.”
3. Say “Hello” again.
If the two words match, the RCA Voice
Control Remote responds: “Press the
buttons you want to use for this voice
command. Press TRAIN to finish.”
5. Press the POWER button.
The RCA Voice Control Remote
responds: “Button accepted. Push
another button.”
“Say
a
word.”
Hello.
Hello.
“B ut ton a cc epted .
Pu sh anot he r
bu tt on”
“B ut ton a cc epted .
Pu sh anot he r
bu tt on”
Continues on next page...
“Press the
buttons...”
6. Press the device button (DVD,
SAT•CBL•DTC, VCR•AUX2, AUDIO,
DVR•AUX1) for the next device you
want to turn on.
The RCA Voice Control Remote responds:
“Button accepted. Push another button.”
“B ut ton a cc epted .
Pu sh anot he r
bu tt on”
To add a slight delay between commands:
Press and hold the PAUSE button.

RCA RCRV06GR Specifications

General

Brand	RCA
Model	RCRV06GR
Category	Remote Control
Language	English