9
Turn the Laserdisc Player On and Off.
1. Press VCR2•LD to set the remote to control
the Laserdisc Player.
2. Press POWER to turn the Laserdisc Player
on or off.
Using the Laserdisc Player function buttons.
1. Turn on the Laserdisc Player.
2. Place a disc in the Laserdisc Player.
3. Press PLAY to start the disc.
4. Press STOP when you are finished.
5. Press PAUSE to pause the disc.
You may want to experiment with the
remote to determine all the buttons which
work with your Laserdisc Player.
Operating Your Laserdisc Player
Turn the Audio Equipment On and Off.
1. Press AUDIO to set the remote to control
the Audio Equipment.
(Most RCA, GE and
ProScan models will only turn on when
pressing AUDIO not POWER).
2. Press POWER to turn the Audio
Equipment on or off.
Using the Audio function buttons.
You may want to experiment with the
remote to determine all the buttons which
work with your Audio Equipment.
Operating Your Audio Equipment
To Next Page
Loading...
Need help?
General
