RCA RD2211

Player Features
Memory Recall
• Press MODE / RECALL to browse the
15 channel memory locations.
• Turn the multi function scroll or press
f.skip / b.skip to tune to a preset chan-
nel.
NOTE: Recall will automatically exit if
no buttons are pressed for 10 seconds.
OR Press ENTER / PLAY to exit recall
mode sooner
Preset Memory (cont’d)
3. Turn the multi-function scroll (select)
button or press f.skip / b.skip to select
the desired channel number (1-15) you
want to store in.
4. Push ENTER to confirm storage and
exit Program mode
NOTE: Program Mode will automatical-
ly exit if no buttons are pressed for 10
seconds. In this case, the station will
not be stored.
OR Press DSP / PLAY to exit Program
Mode sooner without storing the sta-
tion.
NOTE: Press DSP / PLAY to exit program
mode will not change settings in radio
mode.
RECALL
1 98.1 MHz
2 > 98.5 MHz
3 99.1 MHz
4 99.5 MHz
"Enter" To Exit
DSP (Digital Signal Processor)
• Press to select Bass Boost ON/Off.
Bass indicator will appear when Bass
Boost is on.
STOP Feature
• Press STOP / OFF to return to the
Selection Menu.
• Press STOP / OFF again to turn off
the player.
OR
• Press and hold to turn off player.
FM 99.1 MHz
88 108
BASS M-1
Radio Mode
Surppressing Stereo Signal
• Press PLAY to toggle between FM
mono and stereo for stereo FM stations.
A stereo indicator will appear when in
stereo mode.
RECALL
1 98.1 MHz
2 EMPTY
3 > 99.1 MHz
4 99.5 MHz
"Enter" to Exit
49
Delete Preset Memory
1. Press MODE / RECALL to view the
current Preset Memory list.
2. Turn the dial or press f.skip / b.skip
to select the preset memory you want
to delete.
3. When the desired one is selected,
press and hold MODE / RECALL for 2
seconds to delete.
4. “EMPTY” will show beside the mem-
ory location that was cleared and it will
tune to the next stored frequency.