1. Press “/” button to select “H
-Pos” and press the “
/
” button to adjust.
2. Press “
/” button to select “V-Pos” and press the “
/
” button to adjust.
3. Press “/” button to select “Clock” and press the “
/
” button to adjust.
4. Press “
/” button to select “Phase” and press the “
/” button to adjust.
5. Press “
/” button to select “Auto” and press the “
ENTER/
” button to do auto ad
just.
Note: The pictures in regard to function are provided for reference purposes only.
PC Setting
Press the “MENU” button to enter the OSD menu .Then press “/” button to select
the “Setup” menu.
And then press
“” button to select “
PC Setting” and press the
“
ENTER/
” button to enter sub-m
enu.
To Next Page
Loading...
Need help?
General
