To Next PageTo Next PageWhy is there noise or trash pixels on the RCA RLDED3930A-RK screen?
When your RCA LCD TV resolution is higher than the digital channel’s broadcast resolution, the signal is up-converted to match your TV’s resolution. Up-converting can cause this type of effect.
What to do if my RCA LCD TV has audio only no picture?
If you're only getting audio but no picture on your RCA LCD TV, ensure both your video and audio cables are connected properly. Also, make sure that the TV’s tuner signal is not lower than 65%.
Why does my RCA RLDED3930A-RK LCD TV have picture only no audio?
If your RCA LCD TV shows picture but has no audio, ensure the audio cable is connected properly. Also, readjust the volume using the remote control and check that the TV’s tuner signal is not lower than 65%.
How to fix no color on RCA LCD TV?
If your RCA LCD TV has no color, adjust your picture setup and ensure that the saturation and RGB settings are not turned all the way down. Also, check your signal, because TV’s tuner signal must not be lower than 65%.
Why my RCA LCD TV turns on or off slowly?
This RCA LCD TV is a High Definition liquid crystal display panel TV, it requires a few more seconds than normal TVs to power up and show the picture.
Why does switching a channel or source changes the volume on my RCA RLDED3930A-RK LCD TV?
Different channels and inputs will sometimes cause volume changes on your RCA LCD TV because the channel signal’s own volume is already loud. There is no way to remove this completely. The TV has an AUTO VOLUME LEVEL function that can combat this type of effect. Please make sure that function is turned on.
Why cannot I change the time manually on my RCA LCD TV?
Your RCA LCD TV syncs time automatically according to your local TV channel. This function only works while the TV’s tuner is connected to an ANTENNA.
How to remove the big black box in the middle of RCA LCD TV screen?
The big black box in the middle of your RCA LCD TV screen appears because you have turned on closed captioning and are using TEXT1 – TEXT4. Change the setting to CC1 or turn off closed captioning and the box will disappear.
Why does my RCA LCD TV HDCP video have no audio?
If your RCA LCD TV HDCP video has no audio, ensure that you have a 3.5 mm mini-jack cable connected from your HDCP video device’s sound output to the TV’s VGA STEREO INPUT. If your HDCP video device uses RCA AUDIO jacks, you’ll need to obtain an RCA audio converted into 3.5 mm mini-jack cable.
How to unblock channels on RCA RLDED3930A-RK LCD TV?
If your RCA LCD TV channels are blocked, check your auto lock function’s settings inside the OSD. You may have locked some channels without realizing it.
General
