To Next PageTo Next PageWhy does my RCA LCD TV HDCP video have no audio?
If your RCA LCD TV HDCP video has no audio, ensure that you have a 3.5 mm mini-jack cable connected from your HDCP video device’s sound output to the TV’s VGA STEREO INPUT. If your HDCP video device uses RCA AUDIO jacks, you’ll need to obtain an RCA audio converted into 3.5 mm mini-jack cable.
How to fix no picture on RCA LCD TV?
To potentially resolve the issue of no picture on your RCA LCD TV, ensure the power cord is correctly connected, the power is turned on, the video cable is properly connected, and the input signal source is selected with the correct cable connection using the source button.
How to unblock channels on RCA RLDED3930A-RK LCD TV?
If your RCA LCD TV channels are blocked, check your auto lock function’s settings inside the OSD. You may have locked some channels without realizing it.
Why does my RCA LCD TV show weak signal or no program symbol?
If you see a weak signal or a 'no program' symbol on your RCA LCD TV screen, try changing the direction of your antenna and rescanning the channels. If you have cable, contact your cable company to ask about the signal strength of your local cable because the TV’s tuner signal must not be lower than 65%.
How to adjust brightness on RCA RLDED3930A-RK LCD TV when picture is too dark?
If your RCA LCD TV picture is too dark, adjust the contrast, brightness, and lamp settings from the OSD Menu.
Why does my RCA RLDED3930A-RK LCD TV have abnormal colors?
To resolve abnormal colors on your RCA LCD TV, ensure that the colors on the cables match the ports on the back of the television, for example, connect the red cable to the red colored port.
How to fix RCA RLDED3930A-RK LCD TV cannot receive sufficient channels?
If you cannot receive sufficient channels through the ATSC/NTSC tuner on your RCA LCD TV, try changing the direction of your antenna and rescanning the channels. If you have cable, contact your cable company to inquire about the signal strength of your local cable, because TV’s tuner signal must not be lower than 65%.
Why my RCA LCD TV turns on or off slowly?
This RCA LCD TV is a High Definition liquid crystal display panel TV, it requires a few more seconds than normal TVs to power up and show the picture.
How to fix no color on RCA LCD TV?
If your RCA LCD TV has no color, adjust your picture setup and ensure that the saturation and RGB settings are not turned all the way down. Also, check your signal, because TV’s tuner signal must not be lower than 65%.
Why does my RCA RLDED3930A-RK LCD TV have picture only no audio?
If your RCA LCD TV shows picture but has no audio, ensure the audio cable is connected properly. Also, readjust the volume using the remote control and check that the TV’s tuner signal is not lower than 65%.
General
