Why I cannot get 1360X768 on PC VGA with my RCA TV?
If you cannot get 1360x768 resolution on PC VGA with your RCA TV, ensure the TV is recognized as a plug and play monitor. Try updating your video card’s drivers. If that doesn't help, you may need to upgrade your video card to a newer one.
Why does my RCA TV remote control not work?
If your RCA TV remote control isn't working: * Turn off the TV, unplug it, and remove the batteries from the remote for 30 minutes. * Press the remote buttons and the power button randomly for about 2 seconds, then reinstall the batteries. * Ensure there's a clear line of sight between the remote's front sensor and the TV's remote sensor, which is located near the power indicator light.
Why is there picture but no audio on my RCA TV?
If your RCA TV displays a picture but has no audio, first, ensure the audio cable is correctly connected. Next, readjust the volume using the remote control. Ensure that the TV’s tuner signal is not lower than 65%.
What to do if my RCA TV has audio only but no picture?
If your RCA TV has audio but no picture, ensure that both your video and audio cables are connected properly. Also, the TV’s tuner signal must not be lower than 65 %.
Why does my RCA RLED1945A TV picture is too dark?
If the picture on your RCA TV is too dark, adjust the contrast, brightness, and lamp settings from the OSD Menu.
What to do if HDCP video says no HDCP support on my RCA RLED1945A?
If your RCA TV's HDCP video displays a 'no HDCP support' message, reboot your HDCP video device by turning it off and unplugging the power cord. Wait up to 8 minutes before plugging the power back in to see if it resolves the issue.
Why does my RCA TV turns on or off slowly?
Your RCA TV is a High Definition liquid crystal display panel TV. It requires a few more seconds than normal TVs to power up and show the picture.
Why is there no sound on my RCA RLED1945A when connected to PC?
If there is no sound on your RCA TV when connected to a PC, ensure a 3.5 mm mini-jack cable is connected from your PC’s sound output to the TV’s VGA STEREO INPUT.
How to fix snow on RCA RLED1945A TV?
If your RCA TV picture has snow, you should adjust the antenna's position, direction, or connection to improve the signal.
What to do if the RCA TV picture is breaking up?
If your RCA TV picture is breaking up, try retuning the channel. This might resolve the issue.
To Next Page
General
