Why switching a channel or source changes the volume on my RCA TV?
Switching channels or sources may change the volume on your RCA TV because different channels and inputs sometimes have different volume levels. The TV has an AUTO VOLUME LEVEL function that can help manage this. Please ensure that this function is turned on.
Why does my RCA TV remote control not work?
If your RCA TV remote control isn't working: * Turn off the TV, unplug it, and remove the batteries from the remote for 30 minutes. * Press the remote buttons and the power button randomly for about 2 seconds, then reinstall the batteries. * Ensure there's a clear line of sight between the remote's front sensor and the TV's remote sensor, which is located near the power indicator light.
Why is there picture but no audio on my RCA TV?
If your RCA TV displays a picture but has no audio, first, ensure the audio cable is correctly connected. Next, readjust the volume using the remote control. Ensure that the TV’s tuner signal is not lower than 65%.
What to do if my RCA TV has audio only but no picture?
If your RCA TV has audio but no picture, ensure that both your video and audio cables are connected properly. Also, the TV’s tuner signal must not be lower than 65 %.
Why is there noise or trash pixels on the screen of my RCA RLED1945A TV?
Noise or trash pixels on your RCA TV screen can occur when your TV’s resolution is higher than the digital channel’s broadcast resolution. The signal is then up-converted to match your TV’s resolution, which can cause this effect.
Why does my RCA RLED1945A turns off automatically after 5 minutes?
Your RCA TV features a power-saving mode that automatically turns off the TV if there’s no signal provided for more than 5 minutes.
Why does my RCA TV turns on or off slowly?
Your RCA TV is a High Definition liquid crystal display panel TV. It requires a few more seconds than normal TVs to power up and show the picture.
Why is there no sound on my RCA RLED1945A when connected to PC?
If there is no sound on your RCA TV when connected to a PC, ensure a 3.5 mm mini-jack cable is connected from your PC’s sound output to the TV’s VGA STEREO INPUT.
How to fix snow on RCA RLED1945A TV?
If your RCA TV picture has snow, you should adjust the antenna's position, direction, or connection to improve the signal.
What to do if the RCA TV picture is breaking up?
If your RCA TV picture is breaking up, try retuning the channel. This might resolve the issue.
Advises against opening the casing and highlights the risk of electric shock.
Lists essential precautions for safe operation and handling of the TV.
Details precautions regarding product stability and the fragility of the LED panel.
Guidance on grounding antenna systems and avoiding power line proximity for safety.
Guides on adjusting basic picture settings like brightness, contrast, color, and tint.
Details how to adjust sound settings, including equalizer modes and balance.
Details password management, system lock, and input locking for parental controls.
To Next Page
General
