RCA RLED1945A - PC Settings Configuration

1. Press “c/d” button to select “H-Pos” and press the “
e/f
” button to a
djust.
2. Press “c/d” button to select “V-Pos” and press the “
e/f” button to adjust.
3. Press “c/d” button to select “Clock” and press the “
e/f” button to a
djust.
4. Press “c/d” button to select “Phase” and press the “
e/f” button to a
djust.
5. Press “c/d” button to select “Auto” and press the “
ENTER/f
” button t
o do auto adjust.
Note: The pictures in regard to function are provided for reference purposes only.
PC Setting
Press the “MENU” button to enter the OSD menu .Then press “e/f” button to select
the “Setup” menu.And then press
“d”buttont
o select “PC Setting” and press the
“
ENTER/f
”buttonto
enter sub-menu.
