RCA RLED1945A - Setup Wizard Configuration

c. Press “
c
/
d
” button to select “Time Zo
ne” and press the “e/f” button to select time zone.
d. Press “
c
/
d
” button to select “Daylight Saving Time” and press the “e/f” button to select
“On” or “Off”.
e. Press “
c
/
d
” button to select “Time Format” and press the “e/f” button to select “12-hour”
or “24-hour”.
f. Press “
c
/
d
” button to select “Go to next step” and press the “ENTER/f” button to enter next
step.
g. Press “
c
/
d
”
button to select
“Air/C
able”
and press the “e/f” button to select “Air” or
“Cable”.
h. Press “
c
/
d
” button to select “Go to next step” and press the “ENTER/f” button to start auto
scan.
Note: Searching platform will take a long time. Please be patient!
