Desktop TV Bracket Installation & Assembly
4
Note:Instruction manual for the TV stand assembly.
1.Take out the TV unit and base (with stand poles) from the
giftbox, make sure the 4 screw holes on the stand poles and
that of at the lower central part of the back cabinet are in right
direction and keep in order.
2.Assemble the base on the TV unit with the 4 screws (BM5*10)
which are attached in the accessory box
Screw Hole
Base( with stand pole)
TV set
BM5* 10 Screw
To Next Page
Loading...
Need help?
General
