13
MULTI-STAGE COOKING
Your oven can be programmed for up to 3 automatic cooking sequences.
Suppose you want to set the following cooking program.
Microwave cooking
↓
Microwave cooking (with lower power level)
1. Input first microwave cooking program. Do not press START button.
2. Input second microwave cooking program.
4. Press START button to start.
NOTE: Express cooking, auto cook menus, time defrost, weight defrost and air fry
function cannot be set in multistage cooking program.
CHILD LOCK
The safety lock prevents unsupervised operation by children.
To set: In standby mode, press and hold STOP/CANCEL for 3 seconds, then a beep
will sound, the oven will auto enter child lock mode and the lock indicator light will turn
on. In the lock state, all buttons are disabled (except STOP/CANCEL).
To cancel: Press and hold the STOP/CANCEL button for 3 seconds to cancel the
program, a beep will sound and the lock indicator light will disappear.
PROTECTION
OVERHEATING PROTECTION - When the system enters into super high temperature
protection status (except microwave cooking program), the digital display shows "E01"
and continues to beep. After troubleshooting, press STOP/CANCEL button once, the
system comes back to normal standby mode.
LOW TEMPERATURE PROTECTION - When the system enters into low temperature
protection status, the digital display shows "E02" and continues to beep. After
troubleshooting, press STOP/CANCEL button, the system comes back to normal
standby mode.
SENSOR MALFUNCTION PROTECTION - The system enters into protection mode
when the system sensor is short circuited. The display shows "E03" and continues to
beep. After troubleshooting, press STOP/CANCEL button, the system comes back to
normal standby mode.
To Next Page
Loading...
Need help?
General
