Installing the Stand
1.
surface to avoid damaging or scratching.
2. Fix the Left Base Stand to the main unit
using 3pcs provided screws.
3. Fix the Right Base Stand to the main unit
using 3pcs provided screws.
Removing the Stand for Wall-Mounting
1.
surface to avoid damaging or scratching.
2. Untighten the 6 pcs screws holding the
stand assembly and remove them.
3. Attach the wall-mount bracket to the TV
using the mounting holes on the back of
the TV. Mount this TV according to the
instructions included in the wall-mount
bracket.
Wall-Mounting Screws
• Mount the VESA bracket using 4*M6*10 isometric threaded screws (not included).
accordance with the installation instruction.
WARNING:
Never place a television set in an unstable location. A television set may fall, causing serious
personal injury or death. Many injuries, particularly to children, can be acoided by taking
simple precautions such as:
• Using cabinets or stands recommended by the manufacturer of the television set.
• Only using furniture that can safely support the television set.
• Ensuring the television set is not overhanging the edge of the supporting furniture.
• Not placing the television set on tall furniture(for example, cupboards or bookcases) without
anchoring both the furniture and the television set to a suitable support.
• Not placing the television set on cloth or other materials that may be located between the
television set and supporting furniture.
• Attention should be drawn to the environmental aspects of battery disposal.
• Educating children about the dangers of climbing on furniture to reach the television set or
its controls.
If your existing television set is being retained and relocated, the same considerations as
above should be applied.
PREPARATION
8
To Next Page
Loading...
Need help?
General
