PROGRAMMING PLAY ORDER
You can program up to 20 tracks on a CD to play in the order you choose. The CD player must be
stopped before you program tracks.
1. Press PROG to enter Program mode,current track number is flashing.
2. Press SKIP/SEARCH I_ or I_lP-ito choose the track you want to store in the first memory
location. (PROG appears in the display.)
3. Press PROG to enter the track into memory.
4. Repeat Steps 2 and 3 to store additional tracks in memory.
Note: When all 20 memory locations have been used, the program enter mode stop.
Press stopl also can stop program enter mode.
5. Press PLAY/PAUSE I_/11. The tracks play in the programmed order PROGRAM, the current
track number, appear in the display.
Note: During play, you can press SKIP/SEARCH 111_or bill to move through the programmed "l
J
sequence.
CLEARING THE PROGRAM FROM MEMORY
Open the CD door or switch to other function wilt cancel the program.
USING THE STOP BUI-I'ON
Press the STOP • button once to terminate CD play.
To Next Page
Loading...
