Problem Solution
System doesn't turn on • Make sure power cord is securely plugged into the AC power
outlet or that the batteries are fresh.
• Unplug the unit for a moment, and then plug it back in.
• Check the outlet by plugging in another device.
No sound • Adjust volume setting.
• Check for proper connection of speaker wires.
• When TAPE or CD function is selected, make sure PAUSE is not
engaged.
• Make sure you've selected the correct function: TUNER,
TAPE, or CD.
No sound from one channel • Check for proper connection of speaker wires on the channel
(Left or Right).
Poor radio reception • Adjust the FM antenna wire for better FM reception.
• Rotate the unit to achieve better AM reception.
• Try turning off electrical appliances near the unit, such as hair
dryers, vacuum cleaners, or fluorescent lights.
CD doesn't play • Make sure the tray contains a CD.
• Make sure that CD's label isfacing up.
• Make sure that Pause mode is not activated.
• Make sure CD function is selected.
CD sound skips • Clean the CD (as explained in "Care and Maintenance").
• Check CD for warping, scratches, or other damage.
• Check for vibration or shock that may affect the unit; move
system if necessary.
Distorted or noisy recordings * Inspect the recording head and clean it if necessary.
• Demagnetize recording head (as explained in "Care and
Maintenance").
To Next Page
Loading...
