RCA RS1285 User Guide

7
GB
CD PLAYER
Setting Up a CD Program
You can program the CD player to play up to any 32
tracks on the CDs in the tray.
1. While the CD player is stopped, press SET to enter
PROGRAM mode. The
system displays the
next available program
number: “- - P:01,”
with “- -” flashing, prompts you for the
first track
in the program list.
2. Press SKIP FORWARD/
BACKWARD to select a
track (press DISC SKIP or
DISK 1 - DISK 5 to select
a track from a different
disc).
3. Immediately press SET to
assign the selected track to the pro-
gram number. After 3 seconds, you are prompted
for the next track in the program list.
Playing a Program List
While in PROGRAM mode, press PLAY.
Displaying the Program List
1. While the CD player is stopped, press SET to enter
PROGRAM mode.
2. Press SET repeatedly to list each track assignment
in the program list.
Deleting a Track from
a Program List
While in PROGRAM mode, display the programmed
track to be deleted (press SET if necessary to cycle
through the list) and immediately press STOP. To
clear the whole programmed list, press and hold
STOP for 5 seconds. The system displays the message
CLEAR.
Skipping a Disk
Press DISC SKIP.
Searching
Through a CD
Press and hold SKIP FORWARD/ BACK-
WARD to search through a CD as it is playing.
Tip: You
can create a pro-
gram of up to 32
tracks.
5 P:01
D
I
S
C
1
D
I
S
C
5
D
I
S
C
2
D
I
S
C
4
D
I
S
C
3
RS1285/1287 10/29/99 3:00 PM Page 11

RCA RS1285 Specifications

General

Brand	RCA
Model	RS1285
Category	Stereo System
Language	English