RCA RS2001

EN
5
Tuner
Searching for a Station
1. Press TUNER/BAND/APP on the main unit or
TUNER on the remote control to select radio
mode.
2. Select a radio band by pressing TUNER/BAND/
APP on the main unit or BAND•APP on the
remote control:
FM – Frequency Modulation
AM = Amplitude Modulation
In FM band, ST•MO on the remote to select
between stereo and mono sound.
3. Press TUNING - or + on the main unit or
TUNE•CD or on the remote control to
search for a radio station. To search
automatically, press and hold TUNING - or +
on the main unit or TUNE•CD or on
the remote control for 1 second.
FM = 87.5 – 108 MHz,
AM = 520 - 1720KHz
Presetting a Station
1. Press TUNER/BAND/APP on the main unit or
BAND•APP on the remote control to select
band.
2. Press TUNING - or + on the main unit or
TUNE•CD or on the remote control
to select station to be stored.
3. Press PROG./SET/CLEAR to enter program
mode.
4. Press PRESET - or + to select memory location
(up to 30 memory locations). When you are
selecting the preset location, the preset station
number is flashing.
5. Press PROG./SET/CLEAR to confirm the setting.
Auto Preset Programming
Press and hold TUNER/BAND/APP on the main
unit or BAND•APP on the remote control to scan
stations in selected band. A maximum of 30
stations can be stored. Beware of your preset
channels being erased accidentally because the
scanning and storing process is automatic upon
pressing the button.
Press any button to stop scanning.
Listening to the Preset
Station
1. Press TUNER/BAND/APP to enter tuner mode.
2. Press PRESET + / - repeatedly to locate your
desired memory location.
RS2001 EN 7/23/02, 3:48 PM10