RCA RS2300 User Manual

10
EN
Tape Player
Selecting Tape Player
Press SOURCE on the main unit or TAPE on the
remote control to select tape mode.
Playing a Tape
1. In tape mode, press on the cassette door to open
it.
2. Insert a tape into the door and push the door
closed.
3. Press SKIP BACKWARD / SKIP FORWARD
on the main unit or or on the
remote control to position the tape to the
desired starting position.
4. Press PLAY to begin playback.
5. Press PAUSE to pause playback.
Tape Counter
You can keep track of tape position with the tape
counter. Press PROG/SET to reset.
Recording
From Tuner
1. Insert a tape into deck.
2. Press SOURCE repeatedly on the main unit or
TUNER on the remote control to select
Tuner .
3. Press BAND to access the desired radio band.
4.. Press SKIP BACKWARD or SKIP
FORWARD on the main unit or TUNING
or the remote control to tune to the station
to be recorded.
5. Press RECORD to begin recording.
6. press STOP to end recording.
From CD
1. Insert a tape into deck .
2. Press SOURCE repeatedly on the main unit to
select CD then press DISC SKIP or DISC1 / DISC2
/ DISC 3 / DISC 4 /DISC 5 to select the disc to be
recorded.
3. Press SKIP BACKWARD or SKIP
FORWARD on the main unit or TUNING
or on the remote control to select the track
to be recorded.
or
Press PROG/SET to enter program mode.
4. Press RECORD to begin recording.
5. press STOP to end recording.
From AUX
1. Insert a tape into tape deck.
2. Check that the auxiliary device has been
connected correctly to the AUX connector on the
front of the system.
3. Start playback on the auxiliary device.
4. Press RECORD to begin recording.
5. Press STOP to end recording.
F
U
L
L
L
O
G
I
C
C
A
S
S
E
T
T
E
D
E
C
K
RS2300 EN 7/7/03 11:35 AM Page 14

RCA RS2300 Specifications

General

Brand	RCA
Model	RS2300
Category	Stereo System
Language	English