2520 IB US ENG 1/12/00 3:36 PM Page 13
Displaying RDSStation
Information
Toggle REPEAT/RDS to display the frequency, station
name (PS), station type (PTY), clock time (CT), or radio
text (RP). In CT mode, press CTIINTRO key to replace
the displayed time by RDS station time, If clock
time isnot yet set, this information will
be shown as clock time automatically,
Searching by Program Type(PTY)
1.PressPTYiMIX toenter PTYselection
2. Toggle PlY/MIX or rotate the jog to select aPTY
mode,
3, Within 5 seconds, press PRESET SKIP FORWARD/
BACKWARD to search for a station broadcasting the
selected type of program.
_iiiiiiiiiiiiiiaaii
accessthe desired radio band,
3, Tune to the station to be recorded.
4, PressRECORDto begin recording.
5, PressSTOPto end recording.
Playing a Tape
Tip: You _n plY/ a _ from e±d_- deck.
1,PressSOURCErepeatedly to select TAPE.
2,PressSTOP/EJECTto open the cassettedoor.
3,Insert a tape into the door and push the door
closed,
4,PressREWII_JD/EASTFORWARD to position the
tape to the desired starting position,
5.PressPLAY.
Continuous Play
1.Insert a tape into deck 2 and start playback.
2,Insert a tape into deck 1and pressPLAY and
PAUSEtogether.
3,When the tape in deck 2 finishes playback, PAUSE
at deck 1 will be released automatically and start
playback.
Recording
FromTuner
1.Insert a tape into deck 1.
2.PressSOURCErepeatedly to select TUNER and to
From CD
1. Insert a tape into deck 1.
2, PressSOURCErepeatedly to select CD.
3, Insert the disc(s)to be recorded.
4, Selectthe track, CD,or program to be recorded,
5, PressRECORDto begin recording,
6, CD begins to play,
7. PressSTOPto end recording,
Tapeto Tape
1, Insert the destination tape in deck 1.
2, Insert the source tape into deck 2.
3, PressPAUSEand then RECORDon deck 1,
4, PressPLAYon deck 2. The playback and recording
startsimultaneously,
From an Auxiliary Input
1, Insert the cassette in deck 1.
2, Checkthat the auxiliary device has been connected
correctly to the AUX connector on the back of the
audio system,
3, Start playback on the auxilim 7 device,
4, PressRECORDon deck 1 to begin recording.
5.. PressSTOPto end recording,
"%'.°., .............................................................................................................................................................................. ÷°."