36
Menu System Instruction
About
System information
1.Press / key to select "System information" option.
2.Press or "ENTER" key to display system information.
ST
X
NetReady Information
1.Press / key to select "NetReady Information" option.
2.Press or "ENTER" key to display netready information.
ST
X
Software Update(USB)
When the TV need to be updated, please copy the new software to a USB storage to TV, then
operating by following steps.
1.Press / key to select “Software Update” option.
2.Press or ENTER key to confirm.
3.Press “YES” to confirm again, the TV will update by USB. Please wait a few minutes and don’t
turn off the power, it will turn off automatically when updating is finish.
ST
X
Internet Update Check
This can update TV through internet.
To Next Page
Loading...
