12
3. Rotate the tube into the correct
position for use with the
earpiece.
Putting the tube back on
When you’ve nished cleaning the tube and dome, follow
these steps to put the tube back on the earpiece.
Tube connector
1. Find the part of the tube that
connects to the earpiece
(shown here).
Note: A thin tube is shown here for
illustration. These steps apply for the
wide tube as well.
2. Place the hole on the bottom of
tube connector over the post on
the top of the earpiece (shown
here). Turn the tube sideways
on the top of the earpiece and
push straight down to attach
the tube to the earpiece.
Post
Replacing the tube and dome
Visit RCASymphonix.com for information on replacement
tubes and domes.
Putting the battery back in
When you’ve nished cleaning the tube and dome, follow
these steps to put the battery back into the earpiece.
1. Open the battery door on the back of the earpiece.
2. Place the battery into the battery door.
3. Close the battery door completely.
To Next Page
Loading...
Need help?
General
