HDMI
EN - 10
Wi-Fi
Connect to a Wi-Fi Network
1. Go to Settings -> WIRELESS & NETWORKS -> Wi-Fi, and slide Wi-Fi to ON.
2. The device will scan Wi-Fi networks automatically and display the available names.
• If the device finds a network that you connected to previously, it will connect to it
automatically.
3. Tap a network name to connect to it, and enter a password if necessary.
4. Alternatively, if your Wi-Fi router supports Wi-Fi Protected Setup, tap the WPS icon
at the top of the screen, and then press the WPS button on your router.
You can connect the unit to a TV or other display device using an HDMI cable through
the HDMI jack.
1. Go to Settings -> DEVICE -> Hdmi, turn on the HDMI.
2. The system interface on the unit is automatically synchronized with your TV screen.
To HDMI jack
HDMI cable
(not included)
TV
To Next Page
Loading...
