21
Setting Up the VCR
When a duration time has been set:
• The VCR will automatically switch to rewind if
the counter meets or goes past the Auto Repeat set
duration.
• The VCR will automatically switch to playback during
rewind if the counter equals or is less than 0:00.
• The Auto Repeat may be adjusted by setting the
counter to 00:00. This can be done by pressing the
CLEAR button while the tape counter is on screen or on
the front panel display.
• The counter will not reset while rewinding in an Auto
Repeat loop.
To Next Page
Loading...
Need help?
General
