RCA VR617HF

6
Hooking Up the VCR
Connecting Two VCRs for Copying Tapes
OUT TO
TV
IN FROM
ANT.
CH
3 56 4
AUDIO
VIDEO
IN
OUT
R
L
OUT TO
TV
IN FROM
ANT.
CH
3 56 4
AUDIO
VIDEO
IN
OUT
R
L
Playback VCR
RF Coaxial Cable
(supplied)
Recording
VCR
Audio/Video
Cables
RF Coaxial
Cable
or
Use the hookup to the TV
as previously selected on
pages 3, 4, or 5.
From Antenna, Cable
or Cable Box
OUT TO
TV
IN FROM
ANT.
CH
3 56 4
AUDIO
VIDEO
IN
OUT
R
L
OUT TO
TV
IN FROM
ANT.
CH
3 56 4
AUDIO
VIDEO
IN
OUT
R
L
Playback VCR
RF Coaxial Cable
(supplied)
Recording
VCR
Audio/Video
Cables
RF Coaxial
Cable
or
Use the hookup to the TV
as previously selected on
pages 3, 4, or 5.
From Antenna, Cable
or Cable Box
Option A Hookup.
Use this hookup for a simple connection
which requires fewer accessories.
1. Select a hookup from pages 2 through 5
and then modify with this connection.
2. Set the CH 3
55
66
4 switch on the playback
VCR to either channel 3 or 4.
You will tune the recording VCR to this channel
to receive the signal from the playback VCR.
3. Connect as shown.
This connection may require additional
accessories not provided.
4. Plug in power cords of VCRs and TV.
5.
Option B Hookup.
Use this hookup for slightly improved copy
quality and more convenient operation —
use of TV•VCR button not required.
1. Select a hookup from pages 2 through 5
and then modify with this connection.
2. Connect as shown.
This connection requires additional accessories
not provided.
If your other VCR is not stereo, you may need a
Y-adapter to copy sound from both channels.
3. Plug in power cords of VCRs and TV.
4.
You will select the LINE (audio/video)
input on the recording VCR to receive the
signal from the playback VCR.
Continue to page 7.
Continue to page 7.
B
A
Caution: The unauthorized recording of
television programs and other materials
may infringe the rights of others.