First Things First
5
VCR Viewing Channel
When using the ANTENNA jacks to
connect your VCR, tune your TV to
channel 3 or 4.
When using the audio/video jacks to
connect your VCR, tune your TV to the
TV’s video input.
STEP 5: TUNe THE TV
Tune the TV to the VCR viewing channel. The VCR viewing
channel is channel 3 or 4 or the TV’s video input.
• If you connect your VCR using the ANTENNA connectors with
RF antenna cable, set the 3CH.4 switch to channel 3 or
channel 4—the channel you want to use on your TV.
• If you connect your VCR using the AUDIO/VIDEO jacks with
audio/video cables, select the TV’s video input to see the
signal. See the TV Owner’s Manual.
STEP 6: turn on the vcr
Press POWER to turn on the VCR.
Step 7: Interactive Setup
The first time the VCR is turned on, Interactive Setup—a brief
series of on-screen menus—appears. These menus assist in
setting up several of the VCR’s features. Use the remote’s
number buttons to select options.
1. Press 1 for English, 2 for Español (Spanish), or 3 for Français
(French).
Select a language.
Seleccione un idioma.
Choisissez une langue.
1>English
2 Espanol
3 Francais
˜
˜
The remaining Interactive Setup menus will appear in the
language you choose. Follow the on-screen instructions to
complete the process.
To Next Page
Loading...
Need help?
General
