42
OTHER FEATURES
Reception
Some TV programs are broadcast with stereo audio or a second
audio program (SAP) which offers a second language. The
Reception feature lets you select the type of audio you want to
record. Press 1 to switch between Reception : STEREO, MONO,
and SAP.
• Select STEREO for normal or stereo broadcast TV recording.
• Select MONO if the stereo signal is weak and the sound is too
noisy.
• Select SAP to record a second audio program instead of the
normal audio on both the hi-fi and linear tracks.
Tape Playback
The VCR records the same audio on both the Hi-Fi and linear
tracks on the tape. Hi-Fi sound is recorded on separate left and
right stereo channels. Monaural sound is recorded on the linear
track. Press 2 to switch between Tape Playback: HI-FI, LINEAR
and MIX.
To enjoy Hi-Fi sound, connect your VCR to a ster eo television or
amplifier/receiver using the audio/video jacks. The Tape Playback
feature lets you select which audio you play back.
• Select HI-FI to play back sound recorded on the Hi-Fi track
and for normal use.
• Select LINEAR to play back the sound recorded on the linear
monaural track, such as a second audio program (SAP), or a
dubbed voice-over.
• Select MIX to play back the sound recorded on both the
linear track and the Hi-Fi track, sound-on-sound.
To receive Hi-Fi stereo sound, use
audio-video cables with a compatible
TV or receiver. Using only the RF OUT
jack will not produce stereo sound.
To Next Page
Loading...
