RCA VR678HF

15
Setting Up the VCR
12. Use TV•VCR button.
Skip this step if you used one of the advanced hookups.
When using one of the basic hookups, the TV•VCR button
lets you switch between the picture coming from the VCR or
the picture from the TV channel. This button lets you record
a program on the VCR while watching another channel on
the TV. Details are on page 35.
A. Press VCR1 to set the remote to control the VCR.
B. Press TV•VCR to see the picture from the VCR.
The VCR indicator lights in the display panel.
C. Press CHANNEL up or down on the VCR or CHAN on
VCR’s remote to change channels on the VCR.
The channel number changes in the display panel.
D. Press TV•VCR to see the TV channels.
The VCR indicator does not light in the display panel.
Change channels using the TV’s remote.
E. Return the TV to the VCR viewing channel — CH3 or
CH4.
F. Press VCR1, then TV•VCR to switch back to the picture
from the VCR.
13. Set Auto TV/VCR feature.
If you used one of the basic hookups and did not connect the
audio/video jacks of the VCR to the TV, leave the Auto
TV/VCR feature set to ON.
If you have connected your VCR using the audio/video
input of your TV, you can prevent the VCR indicator from
turning on automatically and interrupting the cable or
antenna signal to your TV.
A. Press MENU•PROG on remote to see VCR MAIN MENU
on the TV screen.
B. Press 6 to display PREFERENCES.
C. Press 3 to select Auto TV/VCR: ON or OFF.
• Select ON if you used one of the basic hookups and
watch your VCR on channel 3 or 4 of your TV. The
VCR will automatically switch the TV•VCR setting to
VCR every time the VCR is turned on, a tape with the
safety tab removed is inserted, or you press PLAY.
• Select OFF if you used one of the advanced hookups
and watch your VCR on the video input channel of
your TV. The VCR indicator will not turn on
automatically and the signal from your antenna or
cable to your TV will not be interrupted.
Pressing TV•VCR on the remote will still turn the VCR
indicator on or off and switch the antenna signal.
Startup
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
PREFERENCES
1 Remote Control: VCR1
2 Auto Play: ON
3 Auto TV/VCR: ON
4 Panel Display: AUTO
5 CF Marking: ON
6 CF Playback: AUTO
7 CF Display: BLUE
8 Set Auto Repeat
0 Exit