RCA VR701 User Manual

CABLE BOX SETUP
This setup applies only when all channels are received
through the cable box. There are two steps:
• The first sets up the VCR for the output'channel of the
cable box signal.
The second sets up the VCR for a remote-controllable
cable box so the VCR can control the cable box by
changing channels for timer or VCR Plus+ recordings.
Position the remote-controllable cable box above the
VCR as shown in the Connections section.
1. Press MENU to display the VCR MAIN MENU.
VCR MAIN MENU
1 VCR PLus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
7 Audio
S Language
0 Exit
2. Press4to display the CHANNELS menu.
CHANNELS
Auto Channel Search
Add/Remove Channels
Signal Type: CABLE
VCR PLus+ Setup
Cable Box Setup
Exit
3. Press 5 to display the CABLE BOX SETUP menu. Then
select one of the three choices.
,
CABLE BOX SETUP
Do you use your cable
box to receive ALL
channels or only SOME
channels?
1 ALL channels
2 Only SOME channets
3 Cancel setup
If you selected ALL channels, enter the output channel
of your cable box, usually 03, 04, or video line input and
press MENU.
Cable Box Setup
ALL channels: enter two numbers for
output channel of your cable box or
press INPUT if you connect your cable
box with AUDIO/VIDEO jacks.
Only SOME channels: if you only use
the cable box to tune premium
channels.
Cancel setup: select to cancel.
9

RCA VR701 Specifications

General

Brand	RCA
Model	VR701
Category	VCR
Language	English