To Next PageTo Next Page
Need help?Do you have a question about the RCA WHP140 and is the answer not in the manual?
General| Type | Over-ear |
|---|---|
| Connectivity | Wireless |
| Wireless Technology | RF |
| Bluetooth | No |
| Frequency Response | 20Hz - 20kHz |
| Battery Life | 8 hours |
| Impedance | 32 Ohms |
| Power Source | Rechargeable battery |
| Driver Diameter | 40 mm |
| Foldable | Yes |
| Microphone | No |
| Color Options | Black |
| Range | 100 feet |
| Sensitivity | 100dB |
Advises against continuous extended play at high volumes for hearing health.
Recommends setting a comfortable listening level before wearing headphones to prevent damage.
Details connecting the transmitter audio cord to the audio source's output jack.
Explains connecting the AC adapter to the transmitter and plugging it into the wall outlet.
Describes confirming transmitter operation via LED and optimal placement for signal reception.
Guides on opening the battery compartment, inserting AA batteries correctly, and closing the cover.
Provides notes on using rechargeable batteries, their limitations, and charging methods.
Instructs to turn on the audio source and set player volume for a strong signal to the transmitter.
Details listening for sound, adjusting volume, and tuning the headphone channel for optimal audio.
Guides on powering on the audio source connected to the transmitter.
Instructs to switch the headphone unit to the ON position.
Details checking volume levels before wearing, adjusting volume, and then placing headphones.
Offers solutions for distorted or unclear audio, including checking source volume, connections, and tuning.
Provides troubleshooting steps for no audio output, covering batteries, power, connections, and range.
Suggests using a stereo audio source if only mono sound is received.
Explains how to resolve interference by adjusting the channel tuning on both the transmitter and headphones.
Clarifies the transmitter's auto-cut-off function due to no audio signal and how to resume operation.
