To Next PageTo Next Page
Need help?Do you have a question about the RCA WHP160 and is the answer not in the manual?
General| Type | Over-Ear |
|---|---|
| Wireless | Yes |
| Wireless Technology | RF |
| Frequency Response | 20Hz - 20kHz |
| Battery Life | 8 hours |
| Operating Distance | 100 ft |
| Impedance | 32 Ohms |
| Driver Size | 40 mm |
| Sensitivity | 105 dB |
| Connector | 3.5 mm |
Highlights the system's capabilities like auto scan, range, and rechargeable components.
Utilizes 900 MHz RF technology for wireless audio transmission throughout the home.
Specifies the maximum operating distance of the wireless headphone system.
Provides important safety guidelines for using the wireless headset to prevent hearing damage.
Advises against listening at excessively high volumes to protect hearing.
Recommends reducing volume or stopping use if experiencing ear ringing.
Ensure a comfortable listening volume before placing headphones on the head.
Ensure the connected audio source (TV, etc.) is powered on.
Instructions to switch the headphone receiver to the 'ON' position.
Guides on adjusting volume and properly wearing the headphones.
Explains how to use the Auto Scan button for optimal signal reception.
Guidance on adjusting the frequency to resolve audio interference issues.
Describes the process of adjusting the transmitter frequency and using Auto Scan.
Instructs to turn off the headphone receiver before starting the charging process.
Connects the charging cord to the headphone receiver's input jack.
Describes how the charging process begins and the LED indicators.
Warns against using non-rechargeable or incorrect battery types.
Recommends turning off the unit when not in use to prevent battery damage.
Emphasizes the need for a full 24-hour initial charge for battery longevity.
Resolves problems where no audio is heard through the headphones.
Resolves problems where audio playback is distorted or unclear.
