Need help?Do you have a question about the RCB R10X and is the answer not in the manual?
Raise the riser, lock the folding wrench, and loosen the kick stand.
Ensure sufficient power; the charger's LED indicates full charge when green.
Learn to power on, switch gears, activate lights, and manage cruise control.
Interpret the scooter's display for speed, mileage, and various modes.
Install the handlebar on the stem and tighten screws with the hexagon wrench.
Wear protective gear, step on, kick off, and use the accelerator correctly.
The RCB R10X Electric Scooter is a personal electric vehicle designed for urban commuting and recreational use. It features a robust design and a range of functionalities to enhance the user experience.
The scooter is powered by a 500W motor and a 36V 10Ah battery, providing a maximum riding mileage of 20 miles. It offers multiple speed modes: Deceleration mode (3mph), E (7mph), D (12mph), and S (18mph), allowing users to adjust their speed according to their preference and local regulations. The scooter is equipped with both front and rear LED lights for improved visibility and safety, especially during nighttime rides. A digital LED display on the meter provides real-time information such as speed, sport mode, standard mode, energy-saving mode, deceleration mode, TRIP, and ODO mileage.
The control system includes a power button for various functions:
For braking, the scooter has both right and left brake levers, with the left lever incorporating a bell. It is equipped with disc brakes for effective stopping power.
Note: Performance data such as battery life and mileage are based on specific test conditions (fully charged, 75kg load, 30 °C, 70% humidity, level 3 wind speed, flat road, constant speed of 12mph). Actual performance may vary due to factors like load, temperature, wind speed, road surface, and operating habits. All data is from RCB laboratory and subject to change.
The scooter requires assembly upon receipt, which involves raising the riser, locking the folding wrench, loosening the kickstand, and installing the handlebar. The handlebar is secured with four M5 screws using an M3 Hexagon Wrench.
Before each use, it is crucial to ensure the scooter has sufficient power. The charging process is indicated by an LED on the charger, which changes from red to green when fully charged.
To ride, users should first turn on the scooter and check the power indicator. The riding process involves stepping on the deck with one foot, pushing off with the other to gain initial momentum, and then placing both feet on the deck before pressing the accelerator. When the scooter comes to a complete stop, the accelerator automatically deactivates, requiring the user to repeat the initial push-off to restart.
Safety is paramount, and users are strongly advised to wear a helmet, elbow pads, and knee pads. It is also important to familiarize oneself with the brake system and other instructions before use.
The manual includes sections on "Daily Care And Maintenance," though specific details are not provided in the extracted pages. However, the emphasis on checking the package upon receipt for missing or damaged items suggests a focus on initial quality assurance. The charging instructions highlight the importance of proper battery management for longevity. Regular checks of components like the front and rear wheels (inner honeycomb tires), disc brakes, and lighting system would be part of routine maintenance to ensure safe and optimal operation.
To Next Page
General