To Next PageTo Next Page
Need help?Do you have a question about the RCBS ChargeMaster 1500 and is the answer not in the manual?
Read this manual carefully before operating the scale for safe use and to avoid injury.
Reloading can be hazardous; follow safety rules to minimize risks.
Use equipment as recommended, study instructions, and avoid shortcuts for safe operation.
Proper storage and handling of primers and powder are crucial for safety.
Do not smoke while reloading and use only laboratory-tested data.
This digital scale is for smokeless powders only; do not use with black powder.
Check scale calibration before and during use to ensure accuracy and prevent incorrect charges.
Avoid temperature changes, un-level surfaces, jarring, and ensure weights are clean.
Keep records of reloads with descriptive labels for each box.
Store and use the scale at normal room temperature; unpack carefully and identify items.
Details the input and output specifications for the AC power adaptor.
Specifies the weighing capacity in grains and grams.
Handle the scale carefully as it is fragile; avoid dropping or pulling the platen.
Explains the function of each key on the scale's keypad.
Step-by-step guide to calibrate the scale using provided weights.
Plug scale into dispenser; assemble if purchased separately.
Explains the functions of the dispenser's keypad buttons.
Describes the indicators on the scale's display panel.
Details the four data items required for each memory setting.
Step-by-step process to program up to 30 memory stores.
Instructions on how to retrieve stored load data by memory number or name.
Procedure to quickly drain remaining powder from the dispenser.
Recalls stored load data by entering the cartridge name.
Recalls stored memory data by entering the specific memory number.
Modify existing stored load data settings.
Procedure to delete stored load data entries.
Instructions for setting and dispensing powder charges.
Using the trickle key for slow, controlled powder dispensing.
Enable or disable the audible beeps for scale operations.
Enables automatic powder dispensing when a scale pan is placed.
Two-year warranty against defects in material or workmanship.
Conditions not covered by the warranty, including misuse or unauthorized repair.
Steps and information needed to obtain warranty service.
Legal limitations on implied warranties and liability for damages.
Contact details and sections for warranty registration card completion.
General
