RCF F 12XR - Technical Specifications; Input Channel Specifications; Output and Power Specifications

25
SPECIFICATIONS
Mono input Channels
Microphone inputs
Frequency response
Distortion (THD+N)
Sensitivity range
Max input
Mic input impedance
Phantom Power
Low cut:
Line input
Frequency response
Distortion (THD+N)
Sensitivity range
Max input
Line input impedance
Stereo Input Channels
Line input
Frequency response
Distortion (THD+N)
Sensitivity range
Line input impedance
Mono Channels EQ
High
Mid
Low
Stereo Channels EQ
High
Low
DSP Section
DSP Processing
A/D and D/A converters
Type of effects
Footswitch
Outputs
Main Output
Max Main Mix Output level
Aux Output
Max Aux Output level
Stereo Bus 1/2 Output
Max Bus Output Level
Ctrl Room
Phones Output
Power Supply
Internal Universal Power
Main Voltage
Power Consumption
Weight
Dimensions
RCF F 12XR
6 XLR Balanced
20 Hz - 20 kHz, +/-1 dB
<0,003% at +0 dB, 20 Hz-20 kHz
0 dB to -50 dB
+20 dBu
14 kΩ unbalanced
+48 V
80 Hz
4 TRS jack balanced
20 Hz - 20 kHz, +/- 1dB
<0,003% at +0 dB, 20 Hz-20 kHz
20 dB to -30 dB
+40 dBu
21 kΩ unbalanced
4 pairs TRS jack balanced and 2 pairs RCA unbalanced
20 Hz - 20 kHz, +/- 1 dB
<0,003% at +0 dB, 20 Hz-20 kHz
20 dB to -30 dB
15 kΩ
+/-15 dB @ 10 kHz Shelving
+/-15 dB @ 1,250 kHz Bell
+/-15 dB @ 100 Hz Shelving
+/-15 dB @ 10 kHz Shelving
+/-15 dB @ 100 Hz Shelving
20/27 bit digital signal
24 bit
4 algorithms: reverb, chorus, delay, flanger - 16 presets
TS jack (for effect return mute and unmute)
1 pair of XLR male and 1 pair of TRS jacks
+28 dBu
2 TRS jack
+28 dBu
2 TRS jack
+28 dBu
1 pair of TRS jacks
1 Stereo jack
100 V - 240 V AC, 50-60 Hz
24 W
4.5 kg
L 372 mm, W 355 mm, H 90 mm
SPECIFICATIONS / SPECIFICHE