Single password is a one-time password. It will be invalid after it is input to unlock the lockset once.
Single password setting
1. Enter the menu by master’s fingerprint / password.
2. Select “Temporary User” in the “System Setting” menu.
3. Select “Add a Single PW” and input password.
If single password is set, deleting temporary user’s password will delete both of temporary user’s
passwords and the single password at the same time.
Delete temporary user
1. Enter the menu by master’s fingerprint / password.
2. Select “Temporary User” in the “System Setting” menu.
3. Select “Del. Temp. User” to delete the password of temporary user.
1. Double verify modes (FP&FP verify / FP&PW verify) are only for user. Master is always able to unlock
by single verify.
2. When double verify mode is activated, temporary user and single password is not able to unlock the
lock.
The lock system keeps the latest 50 unlock records. After more than 50 unlock records,
the old records are automatically overwritten by the new records.
Verify setting
1. Enter the menu by master’s fingerprint / password.
2. Select “verify setting” in the “System Setting” menu.
3. Select any verification mode.
Unlock record
7
Lock operation
VIKLUND
Advanced settings
To Next Page
Loading...