En
RECHARGING
LED Light Indicators - RECHARGING
Red LED Light: Battery is charging
Blue LED Light: Battery is fully charged
❖ Red & Blue Flashing LED Light: Potential Battery or System Issue
❖ Stop using this product. Contact Service/Warranty Dept. at 1-216-252-1190
1. Continuously using this product will raise the temperature of the battery
pack – this is normal. Please wait for the main unit to cool down before
recharging.
2. During recharging, the temperature of the charger may be slightly higher
than usual. This is a normal occurrence.
3. If you do not use the AC/DC wall charger adapter for a long time, please
unplug it from the wall power socket.
The Eaze has 3 power (speed) settings:
High – Press the button 1 time to turn the vacuum cleaner “On”.
The vacuum is in the HIGH power setting –
Suggested setting for all floor surface vacuuming.
Medium – Press the button 1 more time (after vacuum is On).
When the vacuum is OFF, press the button 2 times to
put the vacuum in the MEDIUM power setting.
Low – Press the button 1 more time (after vacuum is in Medium
power setting). When the vacuum is OFF, press the
button 3 times to put the vacuum in the LOW power
setting.
To Next Page
Loading...