READY To ASSEMBLE HEADBOARD User Manual

ASSEMBLY INSTRUCTIONS
Before assembling your Headboard, please read through these
instructions carefully. Familiarize yourself with the different parts.
READY
Adult Assembly
Wooden Dowel
JCB M6 X 2”
Allen Wrench
PARTS LIST HARDWARE
A
B
I
Step 1
Step 2
HEADBOARD PANEL 1 PC
1 PC
1 PC
2 PCS
1
2
3
4
LEFT LEG
RIGHT LEG
SPACER BLOCK
NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE ALLEN WRENCH, JCB , BARREL NUT, WOODEN DOWEL, WOOD BUTTON OR WASHER ARE DAMAGED DURING ASSEMBLY.
Instructions apply for all sizes of bed
Full > Queen > King
Insert Wooden Dowels (A) to locator holes on (1)(4) as shown below.
Wooden Dowel 10 X 30mm - 6 pcs
Spare - 2 pcs
A
JCB M6 X 50mm (2”) - 2 pcs
JCB M6 X 70mm (2 3/4”) - 4 pcs
Spare - 1 pc
Spare - 1 pc
B
C
Barrel Nut - 4 pcs
Spare - 1 pc
D
Wood Button - 4 pcs
Spare - 1 pc
E
Flat Washer - 4 pcs
Split Washer - 4 pcs
JCB M6 X 25mm (1”) - 4 pcs
Allen Wrench - 1 pc
Spare - 1 pc
Spare - 1 pc
Spare - 1 pc
Spare - 1 pc
G
H
F
I
1
2
3
4
4
4
A
A
A
A
Attach spacer block (4) to the Legs (2)(3) as shown below, using JCB (B) tighten
with Allen wrench (I).
B
B
HEADBOARD
Headboard & Bed Page 1 of 6

READY To ASSEMBLE HEADBOARD Specifications

General

Brand	READY To ASSEMBLE
Model	HEADBOARD
Category	Indoor Furnishing
Language	English

Summary

Headboard Assembly Instructions

Step 1 Insert Wooden Dowels

Insert Wooden Dowels (A) to locator holes on parts (1) and (4).

Step 2 Attach Spacer Block

Attach spacer block (4) to Legs (2)(3) using JCB (B) and tighten with Allen wrench (I).

Step 3 Attach Legs to Headboard

Attach left/right legs (2)(3) to headboard panel (1) using JCB (C) and barrel nut (D).

Step 4 Use Wood Button

Use wood button (E) to cover assembly holes.

Bed Assembly Instructions

Step 1 Attach Long Rail

Attach long rail (04) to headboard (02) using bed hook.

Step 2 Attach Long Rail Assemblies

Attach long rail assemblies (04) to footboard (03) using bed hook.

Step 3 Lay Slat Kit

Lay slat kit (05) onto the bed frame.

Headboard Attach to Metal Frame Assembly

Step 1 Attach Headboard Assemblies

Attach headboard assemblies (02) to metal frame using JCB (F) and washers (G)(H).