READY To ASSEMBLE SLAT KIT User Manual

02
A
A
C
PARTS LIST
SLAT SECTION
CENTER RAIL
TALL SUPPORT LEG
SHORT SUPPORT LEG
2 SET
2 PCS
4 PCS
4 PCS
01
02
03
04
C
Allen wrench
Assemble support leg (03 / 04) and center rail (02).
Assemble bed frame according to bed assembly instructions.
If using mattress and foundation set the bed up low and use short support leg.
If using Storage Drawers or Trundle Bed choose the tall support leg.
Using Allen screw (A).
Tighten with the Allen wrench (C).
Repeat for other center rail.
Page 1 of 2
03 / 04
03 / 04
HARDWARE
A
B
C
1 1/2” Allen screw - 8 pcs
Spare - 1 pc
1 1/4” Wood screw - 8 pcs
Spare - 2 pcs
Allen wrench - 1 pc
Spare - 1 pc
01
02
03
03
04
04
SLAT KIT FULL BED
NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE ALLEN WRENCH, ALLEN
SCREW OR WOOD SCREW ARE DAMAGED DURING ASSEMBLY.
ASSEMBLY INSTRUCTION
( FULL )
Before assembling your bed slat kit, please read through these
instructions carefully and familiarize yourself with the different parts.
Please note that you will require a Phillips head screwdriver and an allen wrench.
A
1 1/2” Allen screw
READY
ASSEMBLE
TO
PO :
Adult assembly
Step 1
Step 2

READY To ASSEMBLE SLAT KIT Specifications

General

Brand	READY To ASSEMBLE
Model	SLAT KIT
Category	Indoor Furnishing
Language	English

Summary

Parts Identification and Hardware

Bed Frame Components

Lists slat sections, center rails, and tall/short support legs.

Assembly Hardware and Tools

Details Allen screws, wood screws, and the Allen wrench for assembly.

Assembly Steps

Initial Frame Assembly and Leg Choice

Instructions for assembling the bed frame and selecting support leg height.

Attaching Center Rail to Support Legs

Guides the connection of center rails to support legs using screws and wrench.

Securing Slat Kit to Bed Frame

Details attaching the slat kit to the bed frame using screws and a screwdriver.