This drawing is a typical example of the log and coal layout on a Real Fire 800
The layout is basically the same for all models with logs and coals decreased or increased in width
to suit the size of fi re. (The pilot ignition assembly has been omitted from the drawing).
It is important to ensure that the logs and coals are not too tightly placed as this will affect heat
output. Do not place Logs and Coals close to the pilot and ensure that the burner lights easily and
fl ame travels easily across the burner. Reposition if required.
fl ame travels easily across the burner. Reposition if required.
Real Fires Log and Coal Layout
This drawing is a typical example of the log and coal layout on a Real Fire 800. The layout is basically the same for
all models with logs and coals decreased or increased in width to suit the size of fire. (The pilot ignition assembly
has been omitted from the drawing). It is important to ensure that the logs and coals are not too tightly placed as
this will aect heat output. Do not place Logs and Coals close to the pilot and ensure that the burner lights easily
and flame travels easily across the burner. Reposition if required.
Real Fires Log and Coal Layout
To Next Page
Loading...
