Care and Cleaning
Burn trough should be cleaned every two burns. This can be cleaned
using the scraper tool included.
- Allow trough to cool completely before attempting to clean.
- Place the straight edge of the scraper into the can and
pull along the edge.
- Residue should be thrown away in the trash.
Allow all surfaces to cool at least 20 minutes before
attempting to clean.
Use a soft cloth and a standard household glass cleaner to clean
the glass and body of the Insight.
Use stainless steel cleaner or polish to clean the stainless parts.
Discoloration is normal for stainless steel that is in direct contact
with the ame.
10
3
Parts List
Number Description Part Number Quantity
1 Insight 7001 1
2 Firebox 7002 1
3 Glass 7006 2
4 Scraper 7007 1
5 Trough 7010 1
1
3
3
2
4
5
To Next Page
Loading...
