Real Flame PYROTECH DELUXE User Manual

PYROTECH DELUXE
®
INSTALLATION & OPERATING MANUAL
The Pyrotech Deluxe is approved to be installed into a masonry fireplace
or as a zero clearance firebox enclosed by a timber frame & plastered.
The Pyrotech is approved to operate on Natural Gas and Propane (LPG)
gases only. Approval Number GSCS20113.
VERSION 24

Real Flame PYROTECH DELUXE Specifications

General

Fuel Type	Gel Fuel
Color	Black
Category	Indoor Fireplace
Model	PYROTECH DELUXE
Brand	Real Flame
Material	Steel
Burn Time	Approximately 3 hours per canister

Summary

WARNING

INSTALLATION NOTICE

IMPORTANT SAFETY NOTICE

PYROTECH INBUILT MODEL

Pyrotech Inbuilt Installation Procedure

Step-by-step guide for installing the inbuilt Pyrotech unit.

PYROTECH ZERO CLEARANCE MODEL

Pyrotech Zero Clearance Timber Frame Installation

Guides the installation of the zero clearance model in a timber frame.

Fit Zero Clearance Kit to unit as shown below:

Instructions on how to assemble the Zero Clearance Kit onto the unit.

Pyrotech Zero Clearance Installation Procedure

Checklists and steps for the zero clearance installation.

TESTS TO BE CARRIED OUT BY INSTALLER

SERVICING AND MAINTENANCE

Removal of fan or changing valve or control modules.

Removal of Fan

Removal of Control Module

Removal of Control Valve

Removal of Millennium Control Module

GAS CONTROL ASSEMBLY

PYROTECH FLUE TERMINATION (COWLS) REGULATIONS

REMOTE CONTROL OPERATING GUIDE

Teaching RF code

To program

Example of Manual Operation

Example of Auto Operation

WARNING

ELECTRICAL DIAGRAM