To Next PageTo Next Page
Need help?Do you have a question about the Real Flame PYROTECH SPACE HEATER and is the answer not in the manual?
General| Brand | Real Flame |
|---|---|
| Model | PYROTECH SPACE HEATER |
| Category | Heater |
| Language | English |
Details the warranty terms for the firebox and other parts.
Covers general safety warnings, installation requirements, and important notices.
Specifies ventilation requirements for the unit based on room size.
Steps for installing the inbuilt model, including chimney checks and connections.
Details dimensions and clearances for timber frame installation.
Lists and illustrates the components included in the Zero Clearance Kit.
Step-by-step guide on how to assemble the Zero Clearance Kit onto the unit.
Checklists and diagrams for the zero clearance installation process.
Steps and clearances required for installing the freestanding model.
Detailed steps for safely lighting the pilot and main burner.
Instructions on how to safely turn off the gas supply to the appliance.
Key tests installers must perform to ensure correct operation and safety.
Steps to follow if the fire fails to ignite or operate correctly.
Annual schedule for inspection, cleaning, and checking of the appliance components.
Steps for safely removing the fan from the unit.
Procedure for removing the piezo ignitor assembly.
Steps for safely removing the burner from the appliance.
Diagram showing the location of key components within the appliance.
Illustrations of individual parts available in the service kit.
Details the gas control assembly parts and their part numbers.
Explains valve components and provides technical specifications.
Steps for installing the marble hearth and margin set accessory.
Table of dimensions for different mantelpiece models.
