8
Step Five
With the trough in place and the fuel lit, use the included scraper tool
to close the damper to get the desired ame.
NOTE: It is recommended that the damper be closed half way to get
the maximum burn time out of the ventless replace fuel. Keeping the
damper open will shorten the burn time.
5
- Push the glass into the recession. You will feel a bit of resistance. Push
in until you can get the other end of glass into the other side of
replace. Inner springs will center glass and keep from falling out.
- Repeat with other side.
Step Two
- Place one side of the glass into the cutout on either side.
To Next Page
Loading...
