Instructions for
Real Good Toys’
the
Victoria’s Farmhouse
Special Edition Kit #JM-1065
©06/16
Congratulations on your choice of a Real Good Toys product. Your kit has been precision made with meticu-
lous care by our craftspeople using carefully selected materials. This Dollhouse will last for years, even genera-
tions, if heirloom care and attention is given during assembly. Take your time and read the instructions com-
pletely. If you have questions, ask the experts at your local Dollhouse store or at info@realgoodtoys.com
Measure and identify the parts: The kit is packed in
groupings that protect the parts, and that is how the Parts
List is organized. As you measure and identify the parts,
label them with sticky notes using the names from the parts
list, and check them off the parts list so you know you have
everything. Taking the time now to identify and organize
the parts also makes them familiar so you will understand
what the instructions intend as you read ahead.
• Plan ahead so you know where you are going
• Read ahead so you know how to get there
• Paint ahead so the parts will be ready when you need them
Prepare your space: This dollhouse will spread out
over a large area while it is being built. You will need
a large at tabletop for the house, several boxes to keep
parts organized until they are needed, and several trays
lined with waxed paper for holding small parts like
windows and railings.
A snap-lid box will keep your tools and supplies handy
between building sessions.
Preview the Overview (page 3) to plan and organize
your build; this helps make it fun and fullling.
Real Good Toys 122 Gallison Hill Rd Montpelier VT 05602 802 479-2217 www.realgoodtoys.com
Not suitable for children under 13 years of age
California 93120 compliant for formaldehyde phase 2
Before you begin - You have already opened the box and see all the parts organized in boxes and bundles.
For the moment, keep them that way. There are important things to do before you open your glue bottle.
www.realgoodtoys.help
Supplies:
Paint: Interior semi-gloss latex paint... Everything gets at least one coat before assembly - get the paint now.
Paintbrushes 1” or 2” foam brushes for each color, 3” foam roller for interior painting
Sandpaper: 320 grit, 3-5 sheets
Glue: Aleene’s Tacky Glue for the dollhouse, Solvent-Based panel cement for shingles
Masking tape: ¾” or 1”
Wiring: it’s easiest to install some parts during assembly… order wiring supplies now.
Screwdriver: #1 Phillips
Wallpaper paste: Roman’s “Border” Paste
To Next Page
Need help?
General
