Do you have a question about the Realistic 20-127/9127 and is the answer not in the manual?
Overview of test points and component layout for alignment procedures.
Required test equipment and initial setup for alignment procedures.
Procedure for aligning the reference frequency oscillator.
Procedure for aligning the IF section of the receiver.
Procedure for aligning the Voltage Controlled Oscillator (VCO).
Procedure for aligning the RF amplifier stages across different bands.
Final checks and measurements for overall performance and sensitivity.
Test procedure for the Zeromatic function.
Pinout diagrams and functional blocks for various integrated circuits.
Detailed pinout and function for the main microprocessor IC.
Diagrams showing the pin configurations for different transistor types.
Visual guides for identifying diodes and their polarity.
Specific alignment procedures for the VHF-MID band.











