3 SAFETY AND WARRANTY REGISTRATION
3.1 SAFETY INSTRUCTIONS
PLEASE READ AND FOLLOW ALL SAFETY INSTRUCTIONS OUTLINED
IN THIS
OPERATION.
1. Visually inspect the meter prior to operation. If the quartz
cuvette or UV lamp are broken or damaged in any way, do
not use. Contact supplier for replacement parts.
2. Ensure that all responsible personnel carefully read this
Series Products.
3. The s contain a UV light,
which emits light at the UV 254nm wavelength. Never look
directly at the UV light, as it could cause permanent eye
damage and burn unprotected skin.
4.
ensuring the unit is turned off.
Failure to properly operate and maintain this device may impact the
effectiveness of the meter and warranty.
Improper use of this device may cause injury.
3.2 WARRANTY REGISTRATION
PLEASE REGISTER WITHIN 30 DAYS
In order to activate your standard two-year warranty for your product,
the end user of the product is responsible for filling out the
warranty registration information for their company. Failure to do
so could void the warranty. Please see the warranty section for full
two-year warranty program.
Online registration is very quick and simple as all you need to do is go
to the below website link and fill out all of the required information:
www.realtechwater.com/product-registration
Thank you for choosing Real Tech!
To Next Page