Reavon UBR-X200 - User Manual

Questions and Answers

G
gilbertemilySep 8, 2025
Why does my Reavon UBR-X200 CD Player say “No Disc” or “Unknown Disc”?
- D
  Donna WilliamsSep 8, 2025
  If your Reavon CD Player displays a “No Disc” or “Unknown Disc” error, consider the following: * The player may have no disc loaded or an incompatible disc. Eject the disc and check. * The disc's recording surface may be dirty. Eject the disc and clean off any dirt or fingerprints. * The disc may not be properly loaded. Eject the disc and ensure the label side is facing up and the record side is facing down. * There might be condensation on the laser pick-up head. Turn on the player, eject the disc, and leave the player on for about an hour.
S
Sabrina JohnsonAug 23, 2025
Why does the 'Connection Test' fail on my Reavon Blu-ray Player?
- B
  Bobby PerezAug 23, 2025
  The “Connection Test” fails because there is no internet connection. Verify that your router has a connection to the internet. Try power cycling the modem and router. Try a direct Ethernet connection if possible.
T
Theresa BradleyAug 25, 2025
Why is there no sound coming from my Reavon Blu-ray Player?
- L
  laurenkingAug 26, 2025
  There might be several reasons for the lack of sound. First, check the audio cable to ensure it's properly connected. If it is, make sure the mute function isn't activated by pressing the MUTE button. Also, verify that the volume isn't set too low by pressing the VOL+ button to increase it. If you are playing SACD or DVD-Audio, note that coaxial or optical digital audio connections are not supported due to copyright restrictions; use analog or HDMI audio output instead.
S
Sean RiveraAug 26, 2025
What to do if my Reavon Blu-ray Player has no picture?
- T
  Travis SteinAug 27, 2025
  If your Reavon Blu-ray Player isn't displaying a picture, start by checking the video cable to ensure it's properly connected. Next, make sure your TV input is correctly selected to the input where the player is connected. Additionally, if “Pure Audio” mode is engaged, press the PURE button to cancel it. Finally, ensure that the video output format selected on the player is supported by your TV; if not, select a supported output resolution.
J
Jonathan MartinAug 27, 2025
How to fix a Reavon Blu-ray Player remote control failure?
- C
  carlos13Aug 27, 2025
  If your Reavon Blu-ray Player's remote control isn't working, first ensure you are using it within the effective range. If the issue persists, replace the batteries.
W
Wesley HeathSep 22, 2025
Why does my Reavon CD Player “Network” show no server?
- C
  cthompsonSep 22, 2025
  If “Network” shows no server on your Reavon CD Player: Verify that other network features are functional on the device. If the network issues are isolated to the “Network” feature, consult your media server’s documentation to ensure proper configuration.
N
Nancy LoganSep 16, 2025
Why is the color incorrect on my Reavon UBR-X200 CD Player?
- M
  Michael MacdonaldSep 16, 2025
  If your Reavon CD Player displays incorrect color, and you are using HDMI for video output, check the color space setting on both the TV and the player.
D
David DavisSep 18, 2025
What to do if the “Connection Test” fails on my Reavon UBR-X200?
- G
  George KingSep 18, 2025
  If the “Connection Test” fails on your Reavon CD Player, verify that your router has a connection to the internet. Try power cycling the modem and router. If possible, try a direct Ethernet connection.
M
Michael SchwartzSep 7, 2025
What to do if my Reavon UBR-X200 has no picture?
- K
  Kyle HillSep 7, 2025
  If your Reavon CD Player shows no picture, it could be due to: * A video cable that is not properly connected. Check the video cable and reconnect if necessary. * The TV input is not correctly selected. Select the input to which the player is connected. * “Pure Audio” mode may be engaged. Press the PURE button to cancel this mode. * The video output format might not be supported by the TV. Select a supported output resolution.
C
Carolyn HenrySep 4, 2025
Why does my Reavon Blu-ray Player 'Network' show no server?
- J
  Jesse FletcherSep 4, 2025
  The “Network” feature shows no server because there is no network connection, the media server is not properly configured, or the device is connected to the wrong network. Verify that other network features are functional on the device. If the network issues are isolated to the “Network” feature, consult your media server’s documentation to ensure proper configuration.