2. To remove the adapter (10), pull inner hinge
cover to allow access to the infant car
seat adapter release button.
To remove the adapter (10), displace the release
lever and pull the adapter (10) upwards.
To fold the Carrycot
1. Remove the carrycot cap (8) by releasing the
straps.
2. Remove the mattress (7).
3. Release the sun canopy back cover and remove
the carrycot cap (6).
4. Pull the frame supports inwards by their loops
until they release from all four clips (2 clips each
end).
2. Um den Adapter (10) zu entfernen, heben Sie den
Bezug an der Innenseite des Drehgelenks an, um
den Auslöseknopf des Adapters (10) leichter zu er
reichen. Verschieben Sie den Auslösehebel und
ziehen Sie den Adapter (10) nach oben, um den
Adapter (10) zu entfernen.
Babywanne zusammenfalten
1. Entfernen Sie die Babywannenabdeckung (8),
indem Sie die Klettverschlüsse lösen.
2. Entfernen Sie die Matratze (7).
3. Lösen Sie die hintere Sonnendachabdeckung und
entfernen Sie den Babywannenbezug (6).
4. Ziehen Sie die Rahmenstützen mittels ihrer
Schlaufen nach innen, bis sie von allen
vier Klemmen (2 Klemmen pro Ende) freigegeben
werden.