5. Repeat for the opposite side.
6. Pull up on each carrier adapter (10) to ensure it is
securely locked in place.
7. Attach the carrycot by lowering onto the
adapters (10) until it clicks into place.
Pull up on the carrycot to ensure it is securely
locked..
WARNING!
Check that the adapter and carrycot frame attachment
devices, are correctly engaged to the chassis before
use.
To remove carrycot
1. Release the carrycot by pull up the release
button (5), and hold the handle (1) with the other
hand. Then remove the carrycot from stroller.
5. Wiederholen Sie dies für die gegenüberliegende
Seite.
6. Ziehen Sie an jedem Adapter (10), um sicher-
zustellen, dass er sicher eingerastet ist.
7. Befestigen Sie die Babywanne, indem Sie sie
langsam auf die Adapter (10) aufsetzen, bis sie
hörbar einrastet. Ziehen Sie die Babywanne hoch,
um sicherzustellen, dass sie fest eingerastet ist.
WARNUNG!
Prüfen Sie vor der Verwendung, dass die Adapter und
Befestigungselemente korrekt am Rahmen eingerastet
sind.
Babywanne abnehmen
1. Zum Lösen der Babywanne vom Kinderwagen
ziehen Sie den Auslöseknopf (5) während Sie
mit der anderen Hand die Babywanne am
Tragegriff (1) festhalten. Nehmen Sie dann die
Babywanne vom Kinderwagen ab.